|
 |
 |
| |
|
In Audiophile circle often high purity of
coppers are discussed and so called |
|
6N(99.9999) or higher the purity is better
for the sound. Charismatech was |
|
formed with group of people who are in Hi-Fi
business for mole than 20 |
|
years and have knowledge iii different
fields in Hi-Fi, Their backgrounds are |
|
electronics engineering, mechanical
engineering, acoustic engineering and |
|
software developments. In other words, they
do certainly understand all |
|
requirements of making all sort of Hi-Fl and
AV related products including |
|
cables. In their technical knowledge, from
standard 4NOFC to increase purity |
| any higher
does not make any sense due to the fact
resistance increase by |
| impurity is
maximum of 0.3%! Moreover, when the loom
temperature drops |
| 1 C degree
then resistance drops 0.4% which is bigger
than effect of |
| reduction of
impurity! For this reason Charismatech will
not discuss |
| the purity of
the copper in any cable they design.
Charismatech concentrate in |
| real
effective methods of making different cables
for Music Lovers! |
| |
|
AC-300 AC Main Cable |
|
|
Multi solid core 4
micron silver plated configuration
minimize distortions, and contribute
to have good balance from low
frequencies to
ultra-high
frequencies. In our experiences,
standard multi
strand add
coloration, due to micro vibrations
between
fine
conductors, on the other hand large
single solid core exhibit also some
squeak. For those reasons we came up
with
this configuration
of multi
solid core without
saying inductance and resistance are
kept minimum. per detailed drawing,
absorption and dispersion of
conductor vibration are well
controlled with this configuration
and minimized colorations. |
|
Both AC Plug and
Inlet are also very important part
of the AC Main cable. After so many
blind tests we came up with unique
alloy and surface finish for the
best balance. |
|
Standard length of
the cable is 1.5m and 3m
is
available on request. |
| |
| |
|
IC-300 Interconnect Cable |
|
Interconnect cable is very sensitive
for mechanical vibration, due to the
fact it carries very low signal. In
other words, any interferences
Influence the audio signals. III our
study, most important area was how
to reduce electrostatic influences.
We have tried so many different
configurations and came to the one
which you see III drawing. Needless
to say reduction of Impedance was
also Ill our mind when we were
designing this Interconnect cable.
We employed Multi Solid Core Mono
Cristal Copper. |
| |
|
As the results, we
have very balanced so
und
characteristic,
open yet not
harsh and energy of power are well
preserved. |
|
Of course
termination by Cinch and
XLR are
also carefully
studied. |
| |
|
Standard cable
length is 11\1 and different lengths
and XLR
are available on request. |
| |
| |
|
IP-300 Speaker Cable |
|
Unlike Interconnect cable, speaker
cables carry large audio signals,
thus, requirements are quite
different. 'Multi Mono Crystal Sold
Core copper xvith proper shields for
external interferences and
vibrations. |
| We
have experienced large influences of
mechanical vibrations introduced by
speakers playing music. These
mechanical vibrations were
influencing sound characteristics of
the cable at same time even sound
stage was altered. We have tried
several different methods to dump
those vibrations, and fiilally came
up u with highly large aluminum open
air dumper fitted near by the 2
conductors where speaker is
connected. |
|
IP-300 is using Banana termination
only, in our experiences, this
method for connecting speaker is
most stable and reliable for keeping
good sound quality for a long period
of time. |
|
Standard cable length is 2.5 M, 3.5
M and 5 M are available on request. |
| |
|
|
